Torrential Agro Products Pvt Ltd
PRAHLADNAGAR, Ahmedabad, Gujarat
GST No. 24AAHCT0341H1ZO
TrustSEAL Verified
Call 0794266892660% Response Rate
SEND EMAIL

KNIFE GATE VALVES

Torrential group is one of the largest Manufacturer and supplier of KNIFE GATE VALVES.

Bidirectional Gate Valve

Bidirectional Gate Valve
  • Bidirectional Gate Valve
  • Bidirectional Gate Valve
  • Bidirectional Gate Valve
  • Bidirectional Gate Valve
Get Best Quote
Approx. Price: Rs 850 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialMild Steel
Valve Size300 mm
Usage/ApplicationSlurry
StandardMSS SP81
Maximum PressureUPTO 40 BAR
ColorCUSTOMIZED
Maximum TemperatureUPTO 350 DEGREE CELCIUS
End Connection TypeFLANGE / SCREW / WAFER
MediaWater
Automation GradeAutomatic
I Deal InNew Only
ApplicationCHEMICAL / SLUURY / ASH / WATER
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Bidirectional Gate Valves in full range with supply in to well known companies.

Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Delivery Time: READY STOCK
  • Packaging Details: CUSTOMIZED
Yes! I am interested

Ss Gate Valve

Ss Gate Valve
  • Ss Gate Valve
  • Ss Gate Valve
  • Ss Gate Valve
Get Best Quote
Approx. Price: Rs 750 / PieceGet Latest Price
Product Brochure

Product Details:

Valve SizeMore than 48 inch
Valve TypeGATE
MediaSLURRY / GAS / ASH / CHEMICAL / OIL / STEAM
End ConnectionFLANGE
GradeCI / SS / WCB
Working PressureUPTO PN 16 AND 900#
Connection TypeFLANGE END
Place Of OriginINDIA
WeightMEDIUM
Temperature RangeMEIDUM
Is It Corrosion ResistantCorrosion Resistant
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of SS Gate Valves in full range with supply in to well known companies.

Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Delivery Time: READY STOCK
  • Packaging Details: CUSTOMIZED
Yes! I am interested

Pneumatic Slide Gate Valve

Pneumatic Slide Gate Valve
  • Pneumatic Slide Gate Valve
  • Pneumatic Slide Gate Valve
  • Pneumatic Slide Gate Valve
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialStainless Steel
End ConnectionFLANGE / SCREW
Usage/ApplicationCommercial
Opening PatternAutomatic
ColorCUSTOMIZED
ApplicationGAS / OIL / WATER / STEAM
SizeUPTO 24INCH
PressureHIGH / MEDIUM
ShapeROUND
Corrosion ResistanceYES
FinishingMATT
Maximum Working TemperatureUPTO 350 DEGREE CELCIUS
Surface TreatmentCUSTOMIZED
Voltage230 V AC/ 24 V DC
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Pneumatic Slide Gate Valves in full range with supply in to well known companies.

Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Delivery Time: READY STOCK
  • Packaging Details: CUSTOMIZED
Yes! I am interested

Pneumatic Operated Knife Gate Valve

Pneumatic Operated Knife Gate Valve
  • Pneumatic Operated Knife Gate Valve
  • Pneumatic Operated Knife Gate Valve
  • Pneumatic Operated Knife Gate Valve
  • Pneumatic Operated Knife Gate Valve
  • Pneumatic Operated Knife Gate Valve
Get Best Quote
Approx. Price: Rs 750 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Size50 MM TO 800 MM
StandardMSS SP81
Connection TypeWAFER FULL LUGGED TYPE / DOUBLE FLANGE TYPE
Packaging TypeCUSTOMIZED
FeaturesCAST IRON, CAST STEEL & STAINLESS STEEL
PressureMAX 12 BASR
I Deal InNew Only
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Pnuematic Operated Knife Gate Valves in full range with supply in to well known companies.

Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Production Capacity: 1000
  • Delivery Time: READY STOCK
  • Packaging Details: CUSTOMIZED
Yes! I am interested

Knife Edge Gate Valve

Knife Edge Gate Valve
  • Knife Edge Gate Valve
  • Knife Edge Gate Valve
Get Best Quote
Approx. Price: Rs 450 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialCast Iron
Size50 to 900 mm
Usage/ApplicationFLUID, ASH, GAS, WATER, CHEMICAL
ColorCUSTOMIZED
Testing StandardMSS SP81
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Knife Edge Gate Valves in full range with supply in to well known companies.

CI / CS / BI-DIRECTIONAL KNIFE EDGE GATE VALVE MANUAL WHEEL OPERATED   / PNEUMATIC CYLINDER OPERATED


Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Packaging Details: CUSTOMIZED
Yes! I am interested

Pneumatic Cylinder Knife Edge Gate Valve

Pneumatic Cylinder Knife Edge Gate Valve
  • Pneumatic Cylinder Knife Edge Gate Valve
  • Pneumatic Cylinder Knife Edge Gate Valve
Get Best Quote
Approx. Price: Rs 750 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MaterialCast Iron
Size50 TO 900 MM
Usage/ApplicationSLURRY, ASH, CHEMICAL AND MANY MORE
ColorCUSTOMIZED
Testing StandardMSS SP81
I Deal InNew Only
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Pneumatic Cyliner Knife Edge Gate Valves in full range with supply in to well known companies.

Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Packaging Details: CUSTOMIZED
Yes! I am interested

Pulp Valves Knife Gate Valve

Pulp Valves Knife Gate Valve
  • Pulp Valves Knife Gate Valve
  • Pulp Valves Knife Gate Valve
Get Best Quote
Approx. Price: Rs 1,500 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialStainless Steel
Usage/ApplicationSlurry
StandardMSS SP81
ColorCUSTOMIZED
TemperatureUPTO 350 DEGREE CELCIUS
I Deal InNew Only
Country of OriginMade in India

Torrential group is one of the largest Manufacturer and supplier of Pulp Valves Knife Gate Valves in full range with supply in to well known companies.


Gate Valves are designed to serve as isolation valves.  These valves help to control the flow of liquid through the pipes. To start or stop the water flow or any other kind of liquid, these valves are affixed to the pipelines. Gate valves are used for various purposes and they can be seen commonly in homes and commercial centres. Different materials such as stainless steel, cast iron, alloy steel, forged steel etc are used to manufacture these valves.

Gate valves are used to either halt or start the flow of water. Functioning of gate valves includes the lifting of a circular of the rectangular gate out of the fluid path. When gate valves are open, there will be nothing to obstruct the flow as the pipeline diameter and gate have the same opening. The valve size can be determined with this bore diameter.

Advantages
• Gate valves contain very low friction loss
• They can be used both ways in the circuit
• They provide laminar flow, a pressure loss is minimum
• Gate valves help to save energy and reduce total cost of ownership
• There will be low-pressure drop when opened fully and tight sealing

Disadvantages
• Gate valves cannot be opened & closed quickly
• They cause vibrations
• In systems where high-temperature changes irregularly, due to the load in pipe at the valve end, leakages in gate valves occur.
• The operation, maintenance, and repair of gate valves seating surfaces are complex.

Applications:
•    Gate valves are suitable to use in high temperature and pressure conditions.
•    They are used for on-off applications

Supply Area and Segments:
•    We supplied all kind of Gate Valves in All segments like Chemical, Vapour, Oil, Gas, Fluid, Air, Water, Isolation, Liquid, Slurry, Ash, opening – closing or partially obstructing the passageway of pipes.

We have supplied in many countries like Abu Dhabi, Australia, Belgium, Brazil, Canada, China, Doha, Egypt, France, Germany, Indonesia, Italy, Israel, Japan, Kenya, Kuwait, Malaysia, Mexico, Muscat, Nepal, Netherlands, Nigeria North Korea, Qatar, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Thailand, Turkey (Türkiye), UK (United Kingdom), USA (United States of America)

Request
Callback


Additional Information:

  • Delivery Time: READY STOCK
  • Packaging Details: CUSTOMIZED
Yes! I am interested
X

Explore More Products

Industrial Valves
Industrial Valves
Get Best Quote
Manual Ball Valve
Manual Ball Valve
Get Best Quote
Actuator Valves
Actuator Valves
Get Best Quote
Ptfe Lined Valves
Ptfe Lined Valves
Get Best Quote
Y Strainer Valve
Y Strainer Valve
Get Best Quote
View All Products




Reach Us
HIRAL TRIVEDI (DIRECTOR)
Torrential Agro Products Pvt Ltd
503, VRAJ ORIANA, BH. SHELL PETROL PUMP, OPP. KAMESHWAR SCHOOL, PRAHLADNAGAR, Ahmedabad - 380015, Gujarat, India
Get Directions


Call Us


Send E-mail